The PDI-SE-2 stereo encoder, utilizing new technology, offer the CATV system operator low cost, user friendly ways to upgrade existing channels for BTSC Stereo. They will work with most CATV video modulators. Incorporated in the unit is dbx ® licensed companding giving the subscriber rich SURROUND SOUND Stereo. Balancing of stereo signals from any local source is easily accomplished using front panel controls and deviation meters. The PDI-SE-2 requires only 1 3/4" of rack space to hold either one or two encoders. $499.00
per Unit - *Plus Shipping/ Handling |
| • Left and right level control | |
| • LED metering | |
| • dbx | |
| • licensed companding | |
| • Baseband or optional 4.5MHz output | |
| • Requires just 1 3/4? of rack space | |
| • 2 year warranty | |
| • UL Listed Canada/U.S. | |
| • ISO 9002 certified |
| Frequency Response | 20HZ to 14kHZ +/- 1dB |
| Separation | 26dB 20HZ to 14kHZ typical |
| Pilot Rejection | 50dB |
| Signal To Noise Ratio | 65dB, overall through receiver or precision demodulator |
| Compressor | L-R: dbx® |
| Audio Input Impedance | 100 kohms, Balanced or Unbalanced |
| Normal Input Level | (APL)0 dBM, adjustable +/- 10dB |
| Distortion | 0.5% maximum TDH |
| Output Level | 3.5Vp-p at 600 ohms |
| Deviation | ±25kHz,
mono ±50kHz, stereo ±100kHz, maximum |
| 4.5MHz
Option |
 |
| Output Level | 40dBmV (adjustable ±10dB) |
| Spurious Output | -60dBc |
| Frequency Tolerance | ±0.0025% |
|
GENERAL |
| Dimensions | 18" x 1 3/4" x 6 1/2" |
| Power Requirement | 105-125VAC, 50-60Hz, 15W |
| Weight | 5 lb. net |